Ancillary Equipment YT-1000R+PTM (External)

YT-1000R+PTM (External)

The Electro-Pneumatic Positioner YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC 4 to 20mA or split ranges. And Positon Transmitte which is built internlally outputs present opening rate with changing this to current signal of DC 4~20mA maintaining explosion proof type.

Stability of system is improved by the position transmitter which outputs current signal of positoner’s operating and feedback to controller.

It isn't necessary extra bracket for positon transmitter, and it is able to manage positioner and transmitter repectively.

It is able to use in the environment with explosive gas due to explosion-proof structure.

The change of RA/DA Action is convenient, it is able to apply to single or double acting actuator.

It is possible to prevent the hunting with orifice to the small size actuator.

Specifications

PTM	Input type	2Wire
	Input Signal	90°
	Output Signal	4-20mA DC
	Load Resistance	0~600 Ohm
	Noise Range	50mVp.p
	Adjustable Range	Zero : ±10% Span : 60~110%
	Protection	IP67
	Linearity	±1%
	Sensitivity	±0.2%
	Hysteresis	0.2%
	Supply Voltage	15~30V DC
	Explosion Proof	Ex d II CT6
POSITIONER	Same With YT-1000R (Standard Type)