Ancillary Equipment YT-1000R+PTM+L/S (Internal)

YT-1000R+PTM+L/S (Internal)

The Electro-Pneumatic Positioner YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC 4 to 20mA or split ranges. And positon transmitter which is built internally outputs present opening rate with changing this to current signal of DC 4~20mA.

Stablility of the system is improved by output current signal of positoner.

It isn’t necessary any other extra bracket for positon transmitter.

The change of RA/DA Action is convenient, it is able to apply to single or double acting actuator.

It is possible to prevent the hunting with orifice to the small size actuator.

It is economical due to less consumption.

Specifications

PTM	Input type	2Wire
	Input Signal	90°
	Output Signal	4-20mA DC
	Load Resistance	0~600 Ohm
	Noise Range	50mVp.p
	Adjustable Range	Zero : ±10% Span : 60~110%
	Protection	IP67
	Linearity	±1%
	Sensitivity	±0.2%
	Hysteresis	0.2%
	Supply Voltage	15~30V DC
Limit Switch	Rating	AC 0.6A 125V~16A
	Switch Type	2 x SPDT
	Temperature Rating	-40°C ~ 85°C
POSITIONER	Same With YT-1000R (Standard Type)