Angle Valves
Northvale Korting offers a range of angle valves. These are 2-way pneumatically actuated valves designed and manufactured to be ideal for a number of applications, some of which may call for the control of aggressive media.
Angle seat valves allow for high flow rates, and can operate with high temperature and high viscosity media and from zero differential pressures.
Method of operation
Sometimes referred to as air-operated angleseat valves or externally operated valves, angle seat valves are operated by a pressurised pilot medium, often air.
The valve features a pneumatic actuator. The pilot medium flows into the actuator cylinder under pressure and causes the piston to act so that the seat seal opens or closes permitting or prohibiting flow.
Angle Valve Applications
Typical applications include:
- Air drying equipment
- Autoclaves
- Bottling equipment
- Cooling
- Dispensing equipment
- Dye mixing
- Gas
- Ink mixing
- Liquids
- Paint mixing
- Pollution management
- Pre-heating
- Process control
- Steam distribution
- Sterilisers
- Textile equipment
- And so on
| Mechanical Switch (Micro Switch) | |
|---|---|
| Contact Rating: | 16 A |
| Voltage: | 250 V AC |
| Operating Temperature: | 40°C to 150°C |
| Mechanical Lifetime | 2.5 x 105 Ops |
A new addition to the Angle Valve range...
A new addition to the Angle Valve range is the model with limit switches which will show the open & closed status of the valve. The design incorporates two limit switches enclosed in a IP 65 safe housing. This product is available on all sizes from 1/2" to 2". For further information & prices please use the contact us page.
