Norval – Valve Types
Northvale Korting offers the Norval non-return check valve in a range of body types and sizes. Additionally, different body materials are available including bronze, cast iron, fabricated steel and 316 stainless steel. In order to meet your application requirements, a selection of fitting connections are available, including flanged, screwed and RJT or IDF connections.
The principal types are described here. Please refer to:
- Valve Dimensions for sizing;
- Valve Specifications for pressure/temperature ratings, velocity limitations and frequency of operation;
- Performance to determine pressure drop for a given flow rate.
This check valve comprises an integral increased flange cone in stainless steel 316 type and is available in the size range 40 mm (1.5 in) to 200 mm (8 in) diameter for mounting between adjacent pipe flanges to BS 4504 NP 16 or equivalent.
Cone and diaphragm assemblies are also available in nominal 25 mm (1 in) and 32 mm (1.25 in) diameters but are not normally suitable for bolting between standard flanges. A choice of diaphragms is available to suit your application.
Type CIP – RJT or IDF Connections
For many years the Norval Non-Return principle has been very successful throughout most industrial sectors. During discussions with engineers in the Brewing, Soft drinks and Food Industries we established that the Norval principle could be developed to overcome problems encountered with Non-Return Valves in CIP systems.
Today we are also able to utilise customers existing CIP components together with the Norval Cone & Diaphragm maximising operational flexibility and asset value.
SlipStream is the latest development of the well known NORVAL series of Cone and Diaphragm check valves specifically designed for use in compressed air and gas services.
Featuring the familiar perforated stainless steel cone with a Rilsan polymer coating which gives a super smooth, low friction surface over which the diaphragm easily moves during the opening and closing cycles, these non-return valves are generally supplied with the nameplate flag but plain flange check valves can be supplied for insertion into special purpose machinery.
A flanged check valve incorporating the basic cone and diaphragm assembly housed in a flanged cast iron body BS 1452 grade 17 (ASTM equivalent 48 Gr.35).
Available in the size range 40 mm (1.5 in) to 200 mm (8 in) diameter with flanges to BS 4504 NP 16 or equivalent. Fabricated steel bodies are available as an option. Diaphragms to suit application.
A screwed pattern check valve incorporating the basic cone and diaphragm assembly with a specially reduced diameter flange in a two piece bronze body to SS 1400- LG2C (ASTM equivalent B 145-836).
End connections screwed 15 mm (1/2 in) to 50 mm (2 in) BSP.
Also available in 316 stainless.
Essentially for ‘foot valve’ applications where single flange bolting to the end of a pipe is necessary. May also be used for bolting to the sides of tanks or bulkheads. Size range 40 mm (1.5 in) to 200 mm (8 in).
Note: Type CD/WF valve should not be used for clamping between adjacent pipe flanges. The first choice for
that application should be type CD.
Type CD/S Plastic
A new plastic body is now available to house our unique Norval Check Valve. This is available in sizes ½" to 2" and can be supplied with screwed BSP end connections or with push fit ends for easy and quick installation.
This is a very lightweight and cost effective solution to customers' needs and is especially in popular in the chemical industries and water authorities. Where stainless steel is not suitable or cannot be used the cone can be manufactured in PTFE.
For large bore installations we offer the Norval valve in modular form, in sizes 250 mm - 600 mm diameter.
These check valves are constructed by mounting a number of small cone diaphragm assemblies onto a centre plate which is housed in a mild steel fabricated body. The number and size of the individual Norval cone is determined by the flow requirements. By using one of our standard mounting plates and fabricated ends, a permutation to meet all requirements can be achieved. If required, a hand hole cover can be incorporated in the body.