Valve Ancillary Equipment
YT-1200R Pneumatic Positioner
The Pneumatic positioner YT-1200R is used for pneumatic linear valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5psi or split rages.
Size is compact.
The change of RA/DA Action is convenient, it is able to apply to single or double acting actuator.
It is possible to prevent the hunting with orifice to the small size actuator.
It is economical due to less air consumption.
It is able to control the 1/2 split range with simple operation without replacement of parts.
PT (NPT) 1/4
3LPM (Sup=1.4kgf/cm2, 20psi)
PT (NPT) 1/8
80LPM (Sup=1.4kgf/cm2, 20psi)